Redispersible Polymer powder/RDP
1.0 What is RDP
RDP(Redispersible Polymer Powder/Redispersible Powder) or VAE is a water-soluble re-dispersible powder. It is a copolymer of ethylene and vinylacetate. It dissolves in water easily and forms emulsion quickly , RDP could offer strong adhesive and stretching force to improve the workability, flexibility and water-proofing of the materials.
This VAE Re-Dispersible Polymer Powder Used in construction uses polyvinylalcohol as a protective colloid. By adding landcel RDP, the performance of mortar with cement or gypsum can meet the needs of various constructions.
2.0 How to Choose RDP
VAE Re-Dispersible Polymer Powder (RDP)is produced by spray-drying and water-based
emulsion, mostly based on vinylacetate and acrylicacid, dissolves in water easily and quickly
forms emulsion.The main specification is as below, and Ash content , Film tempreture is the key properties.
3.0 How to use RDP(VAE)
Mainly used in ceramic tile adhesive, ceramic tile jointing agent, plastering gypsum, self-leveling mortar, grout material ceramic tile adhesive, bonding mortar exterior insulation system, exterior insulation system of plastering mortar, flexible interior and exterior wall putty, flexible anti-crack mortar, powder polystyrene particles insulation mortar, powder coating, insulation board, have higher request for flexible polymer mortar products.
|
ceramic tile adhesive
|
bonding mortar of external wall external insulation system
|
|
tile jointing agent
|
external wall external insulation system plastering mortar
|
|
self flowing cement mortar
|
flexible putty for inner and outer walls
|
|
flexible crack resistant mortar
|
rubber powder polystyrene particle thermal insulation mortar
|
|
dry powder coating
|
polymer mortar products with high requirements for flexibility
|
Redispersible polymer powder product is water soluble redispersible powder, divided into ethylene/vinylacetate copolymer, with polyvinyl alcohol as a protective colloid, spray drying white powder adhesive.
This powder can be quickly dispersed into emulsion after contact with water, because of the redispersible polymer powder has high bonding capacity and unique properties, such as: water resistance, construction and heat insulation, therefore, their range of application is extremely wide.
RDP/ Redispersible Polymer powder is composed of a special polymers made of powder adhesive after spray drying. This powder is contact with water can be dispersed again in soon after forming emulsion, and with the nature of the same as the initial emulsion, namely the film can be formed after the moisture evaporation, the film has high flexibility, high resistance to weathering and on various substrate with high caking property. the powder environmental protection, energy saving, high quality, used for powder materials, dry-mix mortar is an indispensable functional additives.
Redispersible polymer powder product is water soluble redispersible powder, divided into ethylene/vinylacetate copolymer, with polyvinylalcohol as a protective colloid, spray drying white powder adhesive. This powder can be quickly dispersed into emulsion after contact with water, because of the redispersed polymer powder has high bonding capacity and unique properties, such as: water resistance, construction and heat insulation, therefore, their range of application is extremely wide.
Redispersible Polymer powder(Redispersible Latex powder) is the main raw material in production of internal, external wall putty, adhesive mortar and plaster mortar. the powder is specially applied as the agglutinant of basis materials on triple superphosphate, Talcum powder and white cement and so on. It can improve the adhesion properties water resistance, flexural strength and operability of the basis materials.
Redispersible Polymer powder/RDP is composed of a special polymers made of powder adhesive after spray drying. This powder is contact with water can be dispersed again in soon after forming emulsion, and with the nature of the same as the initial emulsion, namely the film can be formed after the moisture evaporation, the film has high flexibility, high resistance to weathering and on various substrate with high caking property. the powder environmental protection, energy saving, high quality, used for powder materials, dry-mix mortar is an indispensable functional additives.
It can improve the performance of mortar, raise the strength of the mortar, improve the bonding strength of mortar with different base material, improve the mortar flexible and variable line, compressive strength, flexural strength, abrasion resistance and toughness, stick relay and water retention, constructability.
Redispersible Polymer powder is mainly used in all kinds of dry-mix mortar, such as wall putty powder, ceramic tile adhesive, ceramic tile jointing agent, dry powder interface agent, exterior insulation mortar, self-leveling mortar, mending mortar, decorative mortar, waterproof mortar, etc..
It can improve the performance of mortar, raise the strength of the mortar, improve the bonding strength of mortar with different base material, improve the mortar flexible and variable line, compressive strength, flexural strength, abrasion resistance and toughness, stick relay and water retention, constructability.
Redispersible Polymer powder/RDP(Vae)is mainly used in all kinds of dry-mix mortar, such as wall putty powder, ceramic tile adhesive, ceramic tile jointing agent, dry powder interface agent, exterior insulation mortar, self-leveling mortar, mending mortar, decorative mortar, waterproof mortar, etc.
Action principle
In wet mortar to improve construction performance, improve flow performance, increase thixotropic and vertical resistance, improve cohesion, prolong opening time, enhance water retention, After curing, the tensile strength of mortar is improved, the bending strength is increased, the elastic modulus is reduced, the deformability is improved, the material density is increased, the wear-resisting strength is increased, the cohesion strength is improved, the carbonization depth is reduced, and the water absorption of the material is reduced.
Key Properties
Redispersible Polymer Powder RDP can improve adhesion,strength in bending,abrasion resistance,de-formability.It has good rheology and water retention,and can increase the sag resistance of tile adhesives,it can made up to tile adhesives with excellent non-slump properties and putty with good properties.
Benefits of HEARST products:
Better temperature stability Extended Open Time Slip Resistance Sag Resistance Delayed Hydration Improved Workability Dosage-saving Benefit with Blanced Strength & Water Retention Increased Adhension Strength
Technical data
| Technical Date |
HEARST RD 503M |
HEARST RD 760F |
HEARST RD 740H |
HEARST RD 745W |
| Polymer Base |
VAC/VAE |
VAC/VAE |
VAC/VAE |
VAC/VAE/AC |
| Protective Colloid |
Polyvinyl Alcohol |
Polyvinyl Alcohol |
Polyvinyl Alcohol |
Polyvinyl Alcohol |
| Solid Content |
≥ 99.0% |
≥ 99.0% |
≥ 99.0% |
≥ 99.0% |
| Ash Content(900ºC) |
11%±2 |
11%±2 |
11%±2 |
11%±2 |
| Stacking Density (g/L) |
450-550 |
450-550 |
450-550 |
450-550 |
| Average Particle Size(um) |
~80 |
~80 |
~80 |
~80 |
| PH Value |
7.0-9.0 |
7.0-9.0 |
7.0-9.0 |
7.0-9.0 |
| Tg(ºC) |
3 |
-8 |
15 |
-11 |
| MFFT (Minimum film-forming temperature) (ºC) |
0 |
0 |
4 |
0 |
Emulsion and RDP/Redispersible Polymer Powder(redispersible emulsion powder) can form high tensile strength and bond strength on different materials after film formation, and they are combined with inorganic binder cement as the second binder in mortar, cement and polymer play corresponding special features respectively, so that the performance of mortar can be improved. By observing the microstructure of polymer-cement composite material, it is concluded that the addition of redispersible emulsion powder can make the polymer film and become a part of the pore wall, and the mortar forms a whole through the internal force, which improves the cohesion strength of the mortar, and thus increases the failure stress and ultimate strain of the mortar. The long-term properties of redispersible emulsion powder in mortar were studied. It was observed by SEM that after 10 years, the microstructure of polymer in mortar still did not change, and it maintained stable bond, flexural and compressive strength and good hydrophobic properties. Wang Ziming et al. [11] studied the formation mechanism of the redispersible emulsion powder on the strength of the ceramic tile binder, and found that after the polymer dried into film, on the one hand, the polymer film formed a flexible connection between the mortar and the ceramic tile; on the other hand, in the newly mixed mortar, the polymer increased the gas content of the mortar and affected the formation and wettability of the surface. The polymer will also have a better effect on the hydration process and shrinkage of the cement in the binder, all of which will have a better help in improving the bond strength.
The addition of RDP/Redispersible Polymer Powder(redispersible latex powder) to mortar can significantly improve the bond strength with other materials, because the hydrophilic latex powder and the liquid phase of the cement suspension permeate into the pores and capillaries of the matrix, and the latex powder forms a film in the pores and capillaries and is firmly adsorbed on the surface of the matrix, thus ensuring a good bond strength between the cementing material and the matrix.
The optimization of latex powder on mortar performance is due to the fact that latex powder is a high polymer with polar groups. When latex powder is mixed with EPS particles, the non-polar chain segment of latex powder polymerization main chain will physically adsorb the non-polar surface of EPS. The polar groups in the polymer are oriented outward on the surface of EPS particles, making EPS particles change from hydrophobic to hydrophilic. Due to the modification effect of latex powder on the surface of EPS particles, the problem that EPS particles are easy to float when exposed to water and the stratification degree of mortar is large is solved. At this time, cement is added to mix, and the polar groups adsorbed on the surface of EPS particles interact with the cement particles and are closely combined, so that the workability of EPS insulation mortar is significantly improved. This is reflected in the EPS particles are easily wetted by cement slurry, and the binding force between the two is greatly improved.
Feature:
Redispersible Polymer powder(Redispersible Latex powder) is the main raw material in production of internal, external wall putty, adhesive mortar and plaster mortar. the powder is specially applied as the agglutinant of basis materials on triple superphosphate, Talcum powder and white cement and so on. It can improve the adhesion properties water resistance, flexural strength and operability of the basis materials. Application range
| Application |
HEARST RD 503M |
HEARST RD 760F |
HEARST RD 740H |
HEARST RD 745W |
| Adhesive Mortar for EIFS |
★★★ |
★ |
★★★ |
★ |
| Surface Mortar for EIFS |
★★ |
★★★ |
★ |
★★ |
| lnterior Wall Putty powder |
★★ |
★ |
★★★ |
★ |
| Exterior Wall Putty powder |
★★ |
★★★ |
★ |
★★ |
| Tile Adhesive Mortar |
★★ |
★★★ |
★★ |
★★ |
| Self-Leveling Compound |
★★ |
★ |
★★★ |
★ |
| Repair Mortar |
★★ |
★★★ |
★ |
★★ |
| Color Decoration Mortar |
★★ |
★★★ |
★ |
★★ |
| Tile grout |
★★ |
★★★ |
★ |
★★★ |
| Waterproof Mortar |
★ |
★★ |
★ |
★★★ |
★★★ Highly Recommended ★★ Recommended ★ Suitable
Application range
| Tile adhesive mortar/Tile grouts/Tiles Binder/tile joint filler/ Caulk |
| Tile renovation interface agent |
| Skim coat (Putty)/wall putty/Dry putty powder |
| lnterior Wall Putty/Exterior Wall Putty |
| EIFS system mortar/coating mortar for EIFS(external insulation finish system) |
| EIFS system mortar/adhesive mortar for EIFS(external insulation finish system) |
| Thermal insulation mortar/Waterproof Mortar |
| decoration mortar/Color Decoration Mortar |
| dry mixed mortar/Construction Mortar/Repair Mortar |
| Surface modification cement/Cement Based Mortar |
| Powder latex paint |
| Thermal insulation building materials/ Thermal insulation mortar |
| Self-leveling mortar/Self-Leveling Compound |
Classify:
Rdp Redispersible Polymer Powder for waterproof
Rdp Redispersible Polymer Powder for wall putty skim coat
Rdp Redispersible Polymer Powder for Tile adhesive mortar
Rdp Redispersible Polymer Powder for Self-leveling
Rdp Redispersible Polymer Powder for diatom mud
Our laboratory
Our factory
Shandong Hearst Building Material Co.,ltd. is a high-tech enterprise integrating scientific research and development, production and sales, and technical services. The company has fixed assets of more than 100 million yuan, the factory covers an area of 50000 square meters, and a construction area of 26000 square meters. The company has 106 employees, including 60 professional and technical personnel of various types, and 22 personnel with high and intermediate technical titles.
Usage:
The quantity of the powder is to different kinds of basis material. The substrate mixture should be stirred and dispersed fully to ensure the excellent stability of the products. However, high temperature generated from high-pressure and shear stress when mixed should be avoided.
Packing &Storage:
25kg/pp bags 600Kg Big Bag.It can be stored in a cool, dry place below 30°C and protected against humidity and pressing, since the goods is thermoplastic, storage time should not exceed six months. Self life: 180days
FAQ
Q: Are you trading company or manufacturer ?
A: We are factory/manufacturer. OEM can be acceptable.We can produce according to your indicators.
Q: Do you provide samples ? Is it free or extra?
A: Yes, we could offer 200 g free sample for each grade. otherwise, we provide free samples, but the freight will be afford by cleints. Free sample can be offered to ensure our quality.
Q: How can I get the samples?
A: Send me sample request, after confirmation we'll dispatch samples by courier.
Q: What is your terms of payment ?
A: Different payterms available, we will offer best support to our Long-term partners. T/T, DP ,LC ,DA
Q: How about OEM branding and packing?
A: Blank bag, Neutral bag available, OEM bag also available.
Q: How to ensure stable quality
A: Full automatic production line & all the production processes is in the sealed evironment.Have our own lab to test it from batch to batch. Make sure the quality for all the goods out of our plant.
Audited Supplier 
){kind=link}